Rainwater Harvesting Garden Products
If you wish to know more about any of these products, you may request further information through our online enquiry form
|
Column Storage Tanks
the elegant overground alternative
Column Tanks 330, 500 and 1000 litre, for the collection of rainwater for garden use
|
|
Features
- The tanks are elegant, space saving and extremely stable
- Tanks come complete with standard pre-drilled threaded sockets. This facilitates the easy assembly of outlet taps and drain plugs
- Top support eyelets provided for additional supports (if required)
- Harvested rainwater can easily be drawn off using a brass outlet tap, or via a transparent hose and tap, which can also serve as a water level indicator
- High storage volumes with small footprint area
|
|
Rainwater Harvesting Filters
|
Rainwater Harvesting Filter (Model W12),
the advanced downpipe filter with the highest water yield
|
Installation Detail W12 Filter
|
Features
- Suitable for a maximum roof area of up to 120 sq. m.
- Stainless steel fine filter, self-cleaning, low maintenance
- Includes reducers for different sized downpipes DN 70 - DN 100
- 90% efficiency due to large filter area
- Acts as overflow control for over-ground storage tanks
- Standard side discharge DN 70 connection with additional reducers for DN 50 and R 1 1/4"
- Easy change-over from summer to winter operation (without disassembly - simply rotate dial)
|
|
|
|
Rainwater Harvesting Filter (Model W10),
the cost effective downpipe filter with high water yield
|
 
|
Features
- Suitable for a maximum roof area of up to 100 sq. m.
- Captured rainwater is thoroughly cleaned using a fine stainless steel mesh
- Patented self-cleaning action of inclined filter surface
- Includes reducers to match different sized downpipes DN 70 - DN 100
- 90% efficiency due to large filter area
- No reduction in cross section area - important for leaves and heavy rainfall
- Acts as overflow control for overground storage tanks
- Standard side discharge DN 70 connection with additional reducers for DN 50 and R 1 1/4"
- Easy change-over from summer to winter operation
|
|
|
Rainwater Harvesting Filter (Model W5)
|
  |
Features
- Cost effective filter for rain butt use
- Fits down-pipe sizes DN 70 - 100
- Comes complete with hose and tank connector
- Incorporates coarse filter for leaf removal
- Serves as overflow when tank is full (refer diagram)
- Easy change-over from summer to winter operation
- Suitable for a maximum roof area of up to 50 sq. m.
|
|
Leaf Separator
|
 |
Features
- Prevents blocked down-pipes or blocked drains
- Continuously removes leaves and coarse matter
- Ideal rain harvest pre-filter for heavily wooded areas
- Use as pre-filter to protect percolation systems and/or ponds
- Simple change-over between summer/winter mode
- Easy to install
- Fits down-pipe sizes DN 70 - DN 100 (reducers included)
- Self-cleaning and low maintenance
|
|
|
Top-Tank Garden Pack
for overground installation
|
|
Scope of Supply:
1. Down-pipe Rain-harvesting filter
2. Top-Tank(s)
3. Interconnection Pipe (if two tanks)
4. Suction Pipe
5. Portable Garden Jet-Pump 700
|
|
|
- top of page -
|
